Request Quote
OFFICE ADDRESS:
plot no 249, Siyaram complex, Shop no.3, 9B char rasta, Gandhidham, Kutch, Gujarat. PIN 370201
MAIL US:
carbosilindia@outlook.com
CALL US:
+91 81607 25822
Contact Us
Request Quote

Black Joining Mortar

Yes, that is correct. Block Fixer is a ready-to-use mortar that is specifically designed for use with aerated lightweight concrete (AAC) blocks. It is a blend of carefully selected raw materials, including cement, sand, and polymer additives. When mixed with water, it forms a high-strength, thixotropic mortar that is ideal for bonding AAC blocks together.

Block Fixer has several advantages over traditional mortars, including:

  • It is easier to apply and work with.
  • It has a higher bond strength, which makes it more resistant to cracking and movement.
  • It is more water-resistant, which makes it more durable in wet environments.
  • It is less likely to shrink, which helps to maintain the integrity of the wall.

Key Points

  • High Bond strength
  • No curing required after blocks work is done
  • No Shrinkage cracks.
  • Flexible shock and impact resistant
  • Easy to use, just add water
  • No added chloride, Non-toxic
  • Hygienic in service and would not allow bacterial growth.
  • Water cleanable grout.
  • Low VOC – Over curing full reaction takes place
  • Available in 37 widely used colors

Packaging

  • Available in 20 Kg BOPP Bag.

Coverage

  • 90 to 100 Sq foot work of 6 inch blocks per 20 KG bag per 3mm bed thickness.

Shelf Life

  • 12 months from date of packing, if stored in cool and dry place in seal tight condition.

  1. Laying AAC blocks
  2. Smoothing over the block work surface
  3. Filling in gaps and voids
  4. Repairing damaged AAC blocks

It is important to follow the manufacturer’s instructions when using Block Fixer. This will ensure that you get the best results and that the mortar is used safely.

  • Prepare the substrate by cleaning it thoroughly and making sure it is dry.
  • Mix the mortar according to the manufacturer’s instructions.
  • Apply the mortar to the blocks using a trowel or brush.
  • Smooth the mortar over the blocks using a float.
  • Allow the mortar to cure for at least 24 hours before applying any additional coats.

With proper care and use, Block Fixer will provide you with many years of trouble-free service.