Request Quote
OFFICE ADDRESS:
plot no 249, Siyaram complex, Shop no.3, 9B char rasta, Gandhidham, Kutch, Gujarat. PIN 370201
MAIL US:
carbosilindia@outlook.com
CALL US:
+91 81607 25822
Contact Us
Request Quote

Crystal Coat TS1

Carbosil Crystal Coat TS1 is a crystalline waterproofing formulation that is used to prevent water from penetrating concrete. It is a two-part system that consists of a powder and a liquid activator. The powder contains the active ingredients, which are a combination of chemicals that react with moisture to form crystals. The liquid activator helps to speed up the reaction and improve the penetration of the crystals into the concrete.

Crystalline waterproofing works by filling the tiny pores and capillaries in the concrete with crystals. These crystals are water-resistant, so they prevent water from passing through the concrete. The crystals are also flexible, so they can expand and contract with the concrete, which helps to prevent cracking.

Crystalline waterproofing is a permanent solution to water problems in concrete. It is not affected by water pressure or temperature changes, and it does not require any maintenance.

Key Points

  • When applied to inside surfaces, Crystal Coat TS1 integrates and combines with the concrete from within thus forming barrier which can not easily be damaged.
  • the crystalline products tolerate water so there is no need to contunually dry the surface before application, unlike most asphaltic, bitumen or solvent based resin systems.
  • Penetration up to 2′ (51 mm) in 28 days.
  • Can resists negative water pressure up to 7 bars
  • It becomes integral part of concrete even if the coating is damaged.
  • Highly reistant of sault waters, alkali chemicals and mildly acidic environments.
  • When applied to wed concrete by dry shake method, the concretedevelops self healing properties for cracks upto 0.4 mm.

Packaging

  • Available in 5 Kg/15 Kg Bag.

Coverage

  • 0.6 to 0.8 sq. mtr/2 coats

Shelf Life

  • 24 months from date of packing, if stored in cool and dry place in seal tight condition.
  1. Permanent solution to water problems
  2. Not affected by water pressure or temperature changes
  3. Does not require any maintenance
  4. Resistant to salts, alkalies, and seawater
  5. Can withstand mildly acidic conditions
  6. Provides superior protection against frost damage
  7. Can be used to seal joints between new and existing concrete
  • The concrete must be clean, dry, and free of defects before the product is applied.
  • The product must be applied according to the manufacturer’s instructions.
  • The product should be applied in two coats, with each coat allowed to dry completely before the next coat is applied.
  • The product should be protected from rain and direct sunlight until it is completely dry.

With proper care and installation, Carbosil Crystal Coat TS1 can provide many years of protection against water damage.