Pu Flex

The adhesive can be used for both internal and external flooring and wall applications, in domestic, commercial, and industrial settings. It is also suitable for use in laboratories, swimming pools, Turkish baths, thermal water baths, and fountains. Additionally, the adhesive can be used to fix tiles to sheet metal used for prefabricated bathrooms, on worktops and kitchens, balconies, terraces, flat roofs, and domes.

The adhesive is high-elastic, which means that it can accommodate the movement of the substrate and the tiles. This makes it ideal for use on deformable substrates, such as those that are subject to expansion and contraction due to changes in temperature or moisture content. The adhesive is also resistant to staining and is suitable for use with a variety of materials, including those that are susceptible to staining due to water absorption or thermal expansion.

Key Points

Mineral screeds
Eco mineral binder screeds
Cement-based screeds
Prefabricated concrete or fresh concrete castings
Cement plasters and cement-lime mortars
Floors and walls in polyurethane resin
Glazed tiles
Cement-based and resin floor tiles
Porcelain tiles
Wood, materials, rubber, PC, and linoleum

Packaging

Available in 4 Kg Bucket

Dosage

Depends upon substrate porosity & levelling of surface

Shelf Life

24 months from date of packing, if stored in cool and dry place in seal tight condition.

here are the steps on how to use high-elastic adhesive for laying ceramic tiles, porcelain tiles, marble, and natural stone on floors and walls:

Prepare the substrate by making sure it is clean, dry, and free of dust, dirt, grease, and other contaminants.
Apply the adhesive to the substrate using a notched trowel. The amount of adhesive required will vary depending on the size and type of tiles being used.
Press the tiles firmly into the adhesive, making sure that they are level.
Use spacers between the tiles to ensure that they are evenly spaced.
Allow the adhesive to dry completely before grouting the tiles.

Here are some additional tips for using high-elastic adhesive:

The adhesive should be applied in a uniform layer to ensure that the tiles are properly bonded.
The tiles should be pressed firmly into the adhesive to ensure a good bond.
The spacers should be removed after the adhesive has dried.
The tiles should be grouted according to the manufacturer’s instructions.

It is important to follow the manufacturer’s instructions carefully when using high-elastic adhesive. This will help to ensure that the tiles are properly bonded and that the adhesive performs as expected.

Here are some safety precautions to keep in mind when using high-elastic adhesive:

Always wear gloves and eye protection when using this product.
Work in a well-ventilated area.
Do not mix with other chemicals.
Do not allow the adhesive to come into contact with skin or eyes.
If the adhesive comes into contact with skin or eyes, flush the area with water immediately and seek medical attention.