Request Quote
OFFICE ADDRESS:
plot no 249, Siyaram complex, Shop no.3, 9B char rasta, Gandhidham, Kutch, Gujarat. PIN 370201
MAIL US:
carbosilindia@outlook.com
CALL US:
+91 81607 25822
Contact Us
Request Quote

Unifix (Tile Adhesive)

Yes, CARBOSIL unifix is a tile adhesive that can be used for both interior and exterior applications. It is designed for use with ceramic and vitrified tiles, and can be applied to cement and cement-like plaster, cement screeds, cement ground coats, and concrete.

To use CARBOSIL unifix, you will need to prepare the substrate by making sure it is clean, dry, and free of dust and grease. Then, mix the adhesive according to the instructions on the packaging. Apply the adhesive to the substrate using a notched trowel, and then press the tiles into place.

  1. Prepare the substrate. The substrate must be clean, dry, and free of dust and grease. If the substrate is not smooth, you may need to apply a layer of cementitious primer.
  2. Mix the adhesive. Mix the adhesive according to the instructions on the packaging.
  3. Apply the adhesive to the substrate. Use a notched trowel to apply the adhesive to the substrate. The thickness of the adhesive layer will depend on the size of the tiles you are using.
  4. Press the tiles into place. Press the tiles into the adhesive firmly.
  5. Grout the tiles. Once the tiles are in place, you will need to grout them. Grout is a material that fills the gaps between the tiles and provides a smooth finish.

Here are some additional tips for using CARBOSIL unifix:

  • Work in small sections at a time. This will help to prevent the adhesive from drying out before you can apply the tiles.
  • Use a level to make sure that the tiles are installed evenly.
  • Allow the adhesive to dry completely before walking on the tiles.